Issues Regarding Clothing for Sterile Cleanrooms

ISSUES REGARDING CLOTHING FOR STERILE CLEANROOMS

 

The following comments are meant to stimulate discussion and not to provide final answers. In many cases there are claims made which need to be more thoroughly debated.  Links have been provided to hundreds of pages of analyses which are meant to support the claims. We will keep revising this overview to reflect the comments of those providing additional insights and counter views.

USER COMFORT AND HEALTH

Comfort

Protection against liquid spills

  • Verbal observation that in Europethis is a bigger consideration than in the U.S.
     

  • This is also a bigger concern in healthcare such as surgical suites. So there needs to be discussion among hospital and industry specialists

Protection against toxic products

  • Cytostatics example: Any work with cytostatics requires the effective protection of workers from the dangers of drugs, which can have various carcinogenic, mutagenic and reprotoxic impact. At the same time, it is important to protect the product against contamination from people. Workers must therefore be required to wear suitable protective clothing.. Cytostatics are used as drugs in cancer therapy (chemotherapy) to inhibit the multiplication of tumor cells and are also used increasingly to treat other diseases. However, their toxicity affects not only tumor cells but also healthy cells.

To prevent hazards to staff while handling cytostatics, a range of suitable precautions must be taken. Both clean cleanroom clothing and chemical protective clothing need to meet the same basic criteria for use in a cleanroom: the material must be low-linting, the design must be sufficiently tight, and the danger of collecting particles on the surface of the garment must be minimized. To be suitable for dealing with cytostatics, such clothing must also be comfortable to wear, it must have good electrostatic discharge efficiency and sterilization must be possible. As well as providing product protection, Tyvek® and Tychem® protective clothing and accessories also meet the requirements on chemical protective clothing in Category III and thus personal protection.

Wicking properties for perspiration

Garment stiffness

  • Frequently voiced complaint about Tyvek.
     

  • On the other hand it is lighter and this may offset stiffness tendency.

GARMENT DONNING

Conclusions of Kimberly Clark survey

  • The sterile cleanroom gowning process takes between 5 and 10 minutes for the vast majority of cleanroom operators.
  • Almost one-third of cleanroom operators indicate that cleanroom coveralls are the most difficult part of the six-step gowning process, and that donning coveralls takes an average of 30 percent of the entire gowning process time.
  • Cleanroom operators are disposing of an average of 10 percent of their sterile cleanroom garments every week due to exterior contamination during the gowning process.
  • Most new cleanroom operators need 30 hours of initial training on cGMP donning procedures before they are allowed in the cleanroom itself, and an average of six hours of ongoing training each week.
  • Built-in snaps which gather up legs and arms to lower the risk of the garment touching the floor, then automatically release as the garment is put on.
  • Aninside-out fold pattern  presents the inside of the garment as the package is opened, reducing the risk of touching and contaminating the outside of the apparel.
  • A highly visible blue line along the inside of the garment  signals the proper place to grasp while gowning, helping workers avoid touching the exterior of the garment.
  • Thumb loops help keep the garment from riding up the arm and help to maintain the glove/garment interface.

http://www.mcilvainecompany.com/Decision_Tree/subscriber/articles/Donning-by-Design.htm

Comments about the survey

  • Thumb loop was developed a number of years ago.

GARMENT LIFE

Deterioration of Tyvek with gamma sterilization

  • It is a function of intensity.
     

  • Deterioration is apparent by the second or third time the garment is sterilized.

Deterioration of reusable garments with processing

  • See KTH study under laundering below

PRODUCT STERILITY

Anti microbials

  • For the first trial which utilized a permanent finish of propyldimethyloctadecyl ammonium, the treated and non-treated garments yielded similar CFU counts at the soil stage, but the treated garments had significantly lower CFU counts after the final wash cycle. For the second trial which utilized organ functional silanes, the data yielded little difference in CFU counts from the treated garments to un-treated control group for the third trial which utilized oxygenated bleach products, the data gathered yielded little difference in CFU counts from the treated garments to un-treated control group. The treated garments however, showed a very consistent and low, single digit CFU reading, which was very encouraging. The most intriguing result from all three trials was the performance of the control sets of garments. With a few exceptions during the second trial, they performed well, with counts well within an acceptable range, lending credence to the value of a stringent wash and handling processProtection or Hype

Undergarments

  • In sterile environments, Richard Bryant of Nitritex (Suffolk, UK) states that it’s recommended that cleanroom undergarments be used as an alternative to street clothes. These should be manufactured using nonlinting polyester barrier fabrics. The use of nonlinting polyester undergarments with a good coverall containment system will lower the number of particles carried into the cleanroom environment. Reusable Cleanroom Garments, Part 1, February 2006.

    Knitted cuffs-concern of particulate

Seam techniques to avoid particle passage

  • Special kinds of seam techniques are used for sewing these garments in order to avoid the passage of particles inside or outside the apparel. There are particularly three kinds of seams: • Interlocked stitching: Two pieces of garments are joined together with an interlocking stitching technique. • Double needle stitching: Two pieces are interlocked and then sewed with a double needle. • Layer bound stitching: A third layer of garment is put over the seam and stitched to ensure extra protection Seam Technique for Disposable Apparel

Laundering

  • A dispersal chamber at KTH has been used to determine that relative to microbiological contamination no significant difference was seen between disposable and reusable clothing washed and sterilized once. But there was a big increase in particles escaping after 25 wash and sterilization cycles. Aseptic Production, Gowning Systems and Airborne Contaminants 
     

  • Most cleanroom garment laundries have validated their processes for at least 100 launder cycles for the cleanroom garments they supply to the cleanroom industry. However, Jan Eudy recommend an objective testing of the cleanroom garment and fabric as well as establishing the efficacy of particle entrapment, the lack of particle shedding, and ESD efficacy as the criteria for replacement. When Should Cleanroom Garments Be Replaced? 
     

  • InterWEBview with Jan Eudy of Cintas asserts that there is a big difference between a good laundry and a mediocre one in terms of garment deterioration per wash cycle. Reusable Garments InerWEBview with Jan Eudy of Cintas, February 2011

Q &A procedures: How reliable:

CCMG requirements more stringent now than before

Hospital pharmacies have special requirements

Packaging

  • Packagingmust first assure that the product is sterile at the time it is sealed. It must provide for maintenance of sterility prior to opening. It must be user friendly to prevent contamination upon opening.
  • Can reusable garment consistently meet these criteria. The single use garment proponents say that laundries are dealing with smaller numbers and cannot be sufficiently well organized to prevent sterility lapses. In response we need input from those laundries that are so organized.
  • A unique process to package the new garments for sterility assurance. The technology uses a vacuum seal process to allow the breathable SMS fabric to be sterilized with Gamma irradiation. The unique look and irradiation indicators on each package help to confirm irradiation and sterility. http://www.mcilvainecompany.com/Decision_Tree/subscriber/articles/Donning-by-Design.htm
  • To what extent is the packaging design requirement affected by the gowning procedures and by the physical aspects such as the gowning area and pass thru?

GARMENT DESIGN

Sizing

Shapes

 

SINGLE USE VS. REUSABLEFOR STERILE ENVIRONMENTS

The greater the number of changes the more greater the attractiveness ofreusables

  • In sterile environments fabric that is resistant to multiple sterilization cycles must be used in the manufacture of the garments. Garment changes – cleanrooms that require 20 garment changes per week should be looking to use reusable launderable garments. Getting the Best Garment Service

Variation by cleanroom class

  • Disposable garments are a viable option for some users and applications. Horton says disposables make sense in many ISO Class 6 operations and those that are not conducive to garment cleaning, such as nuclear, some types of food processing, and some pharmaceutical applications. Disposable garments also might make sense for companies that have low gown usage requirements, and they are recommended in biohazardous critical environments (BSL-2, -3, and -4 cleanrooms) and heavy soil applications such as preventive or corrective maintenance of equipment in the cleanroom, according to Eudy The Well Dressed Cleanroom

Comfort comparison

  • Research shows that single use garments, which are more comfortable, easier to don, and minimize contamination are highly valued in the pharmaceutical industry. Cleanroom Clothing InterWEBview™ with Damon Larkin of Kimberly-Clark
     

  • Several interviewees contest this claim and say thatSMS and Tyvek and similar garments are less comfortable due to heat. Reusable Garments InerWEBview with Jan Eudy of Cintas, February 2011

  • What is hot to a heavier person may seem comfortable to a thin person. In an office setting with a constant temperature of 70 degrees F. Some people will complain of heat and others of cold.
     

  • Two variables are the physical make up of the individual andsecondly the conditions. The location in the cleanroom can make a difference.  The amount of physical activity is another.

Sustainability and Greenhouse Gases

Garment Particle Shedding (as opposed to the people inside the garment)

  • Helmke drum tests are unreliable.  Place a garment one way in the drum and get one result. Place it another way and get a different result (Moschner-Dastex).
     

  • More analysis needs to be done of garment particle shedding.

 

Fabric Choices Single Use

SMS

  • SMS (Spunbond Meltblown Spunbond) material that provides a cloth-like feel and is 25 times more breathable than TYVEKhttp://www.mcilvainecompany.com/Decision_Tree/subscriber/articles/Donning-by-Design.htm
     

  • For the past 40+ years, disposable cleanroom suits have been made from flash-spun polyethylene fabric. According to industry analysts, flash-spun polyethylene provides filtration efficiency for sub-micron sized particles and microorganisms and is suitable for light splash protection from non-hazardous liquids. Disposable suits also can be made from spunbond meltblown- spunbond (SMS) fabric, which has outer layers of spunbond polypropylene for strength and cloth-like comfort, with middle layers composed of a matrix of microfibers, which creates a torturous path for fine particles and liquids. the Human Element

Tyvek

  • Tyvek nonwoven material has been upgraded over the years and has proven to be a good performer in Class 100 (ISO Class 5) to Class 100,000 (ISO Class 8) environments, depending on garment processing and packaging. Free-fiber generation at wear points, however, is a disadvantage of this material.. It’s a breathable fabric that provides filtration efficiency for submicron-sized particles and microorganisms, and it’s suitable for light splash protection from non-hazardous liquids. Unlike film laminates, the protective properties of Tyvek are an inherent feature of the material and cannot be abraded or scratched off. Disposable Cleanroom Garment Use and Markets, December 2005. 
     

  • The above claim relative to the free fiber generation at wear points was reported second hand and needs further analysis.

  • Material degradation becomes a factor for multiple wear garments. The desired Sterility Assurance Level( SAL) is 10(6) insuring a one in one million probability of a garment being nonsterile. This requires more radiation which reduces the life of multi wear garments. The supply chain for multiple use garments is complicated and generally requires contracts with processors of 1 to 5 years. Supply chain for single use garments is less complicated There are two general approaches that a pharmaceutical company can use to assure the quality of incoming garments. • Use internal personnel to monitor and periodically audit • Third party verification of supplier quality system Third part verification requires a certification system (e.g. two ISO standards and or EC Certification) Comfort is another factor . the non woven Tyvek used in single use garments is lighter than woven materials used in multiwear garments. Tyvek is comparable in air permeability but is stiffer. Comfort is typically quantified through air permeability water vapor transmission rates and material stiffness. Apparel System Selection for Pharmaceutical Cleanrooms

Fabric Choices - Reusable

Fabric Options

  • According to John Smith of Precision Fabrics Group (PFG), in the US market, most of the fabrics sold are plain weaves, whereas in Europe, a much higher percentage of the fabrics are twill weaves. “Since the fabrics have to perform the same function of particle filtration, it seems that both can do so if they are properly constructed,” Smith continues, “. The advantage that the twill weaves have is that the hand is more supple than a plain weave, although the plain weaves become more supple after laundering. The disadvantage is the higher fabric weight and, therefore, garment weight, and potential latent release of particles if the laundering is not done properly. Reusable Cleanroom Garments ,Part 2, March 2006. 
     

  • Burlington C3® is engineered to meet a Class 10 cleanroom's rigid demands for the microelectronics industry. The fabric is designed to guard the product against airborne particles, static dissipative charges, bacteria, and lint. It is made from a dense plain weave 100 percent multifilament polyester yarn with a microengineered carbon fiber inter-woven into a grid pattern.

  • Stern & Sterns CHEMSTAT 909 and 909A are two antistatic fabrics with a patented conductive yarn that is an extruded copolymer of polyester and carbon that is impervious to industrial laundering in excess of 300 washings. CHEMSTAT 909A is a tighter version of the CHEMSTAT 909 material for use in Class-10 cleanrooms. Both are 100 percent DACRON polyester fabrics employing the patented raised grid conductive fiber for static dissipation. 
     

  • DuPont's 100% Dacron polyester yarn is woven into both taffeta and herringbone weaves. Taffeta fabric is constructed in a plain weave while herringbone is a heavier broken-twill weave that produces a balanced zigzag effect. Both serve in many cleanroom and peripheral area applications as an effective barrier for airborne particles and bacteria filtration. 100% Dacron polyester: Taffeta 2.58 oz/ sq. yd.- Herringbone 4.3 oz/sq yd Excellent resistance to acids and alkalis  Extremely limited tinting·  High resistance to sagging.
     

  • INTEGRITY 2000® Precision Fabrics INTEGRITY 2000"is a densely woven filament DACRON polyester grid fabric designed to meet the quality and performance standards demanded by the protective apparel industry. This product is highly fluid repellent and also contains a durable antimicrobial compound.
     

  • Teijinselguard Selguard II® is a highly functional Class 100 cleanroom fabric which offers both excellent particulate control and antistatic performance without compromising employee comfort. This non-linting fabric is a continuous filament, 100 percent polyester twill with electrically conductive fibers sleeved in polyester and integrally woven into a grid design.

 Source: http://www.mcilvainecompany.com/Decision_Tree/subscriber/Tree/DescriptionTextLinks/Issues%20regarding%20clothing%20for%20sterile%20cleanrooms.htm